|
 |
|
Boardwalk Pilings Plus Pilings for Docks, Marinas &
Piers |
|
 |
 |
 |
 |
|
Gulf
Coast Lumber is an international supplier of pressure
treated boardwalk pilings, plus pilings for boathouses,
bridges, bulkheads, decks, docks, foundations and piers,
with locations in Houston, Texas and the Central American
Country of Costa Rica. Our marine piling is treated
with CCA at 2.50 pcf (pounds per cubic foot) for use
in salt and brackish water applications. Piling for
land, freshwater immersion, and foundation use is treated
with CCA at either .60 or .80 pounds per cubic foot
depending on your requirements and specifications. Call
Gulf Coast Lumber at 281-670-8631 or contact
us online for your wood piling quotation.
We also sell a full
line of stringers
and framing lumber for piers and docks. We have
both rough and dressed lumber in 2", 3", 4"
and 6" thicknesses up to 12" in width.
Stringers for use in salt and brackish water, we sell
treated with CCA, and for freshwater applications, we
sell stringers treated with MCQ.
Don’t
be fooled by the competition!
All of our marine pilings
plus our poles and timber is kiln dried prior to treatment
to ensure maximum penetration of the preservative.
Upon request, we will provide Certifications of Treatments
on all Poles, Pilings or Timber purchased from Gulf
Coast Lumber. Call us at 281-670-8631 or contact
us online to discuss your needs.
|
|
|
|
|
Gulf Coast
Lumber sells a complete line of treated wood utility
poles with lengths up to 120 feet. Our utility
poles are made from Southern Yellow Pine that is selected
and manufactured to comply with American National Standard
Institute (ANSI) Specifications, and we can meet additional
customer specifications as required. Gulf Coast Lumber
provides varying degrees of treatment designed to delay
the decaying process and ensure pole longevity. Gulf
Coast Lumber can supply practically any size pole, you
may require to anywhere in the world.
Our Product Specialists are ready to
answer any questions you may have regarding our treated
poles. Call Gulf Coast Lumber at 281-670-8631 or contact
us online.
|
|
|
|
|
Benefits
of Building with Poles & Pilings |
|
|
|
• |
Treated
Poles and Pilings have long life spans due to
reduced heartwood exposure. |
• |
Treated poles and
wood pilings are stronger and suffer less warping
than dimensional timbers. |
• |
Long life span
and superior strength make treated poles and pilings
very cost effective. Normally less expensive than
comparable square timber. |
• |
GCL can provide
solid NO-TAPER poles call us at 281-670-8631.
|
• |
Polymer coating
will drastically increase the longevity of any
pole or piling. |
|
|
| |
|
Large Pole and Piling Size Chart |
|
|
|
Size* |
8' |
10' |
12' |
14' |
16' |
18' |
20' |
10"
Butt |
Stock |
Stock |
Stock |
Stock |
Stock |
Stock |
Stock |
11"
Butt |
Avail |
Avail |
Avail |
Avail |
Avail |
Avail |
Avail |
12"
Butt |
Stock |
Stock |
Stock |
Stock |
Stock |
Stock |
Stock |
13"
Butt |
Avail |
Avail |
Avail |
Avail |
Avail |
Avail |
Avail |
|
|
|
|
|
|
|
|
Size* |
25' |
30' |
35' |
40' |
45' |
50' |
55' |
10"
Butt |
Stock |
Stock |
Stock |
N/A |
N/A |
N/A |
N/A |
11"
Butt |
Avail |
Avail |
Avail |
Avail |
Avail |
Avail |
N/A |
12"
Butt |
Stock |
Stock |
Stock |
Stock |
Stock |
Avail |
Avail |
13"
Butt |
Avail |
Avail |
Avail |
Stock |
Stock |
Stock |
Avail |
Need A 60 or 70' Pole? Contact
Gulf Coast Lumber at (281) 670-8631 we can supply poles
up to 120'.
*Poles taper
approximately 1" in diameter per ten feet of
length
*All sizes and lengths can be treated CCA to .40,
.60, .80, or 2.5 pcf |
|
|
|
|
Polymer
Coated Wood for the Ultimate Protection |
|
|
|
A
protective polymer vinyl coating engineered specifically
for use on wood. The polymer coating bonds to wood
creating a protective barrier that is impenetrable
to marine borers & termites.
Architects, Contractors
and Engineers offer polymer coated wood products to
set themselves apart from the competition as offering
unique products to solve their client requirements.
Wood with our polymer coating is an excellent value-add
offering for customers, creating a product that will
last virtually forever. Our polymer zone coated Fence
Posts and Utility Poles will NOT
rot at the ground line.
Utility companies
benefit from using zone coated polymer poles with
savings of labor and materials costs.
The benefits of using
polymer coatings for a utility company are simple.
Polymer
Zone Coating:
• Prolongs the useable life of the utility pole.
• Prevents the need for wrapping the pole in
the future - saving material and labor cost.
• Assures environmental protection - chemicals
cannot leach into soil.
• Polymer Coating is applied at the production
facility - no on site labor is required.
• Can be drilled or cut if required.
Call Gulf Coast Lumber
at 281-670-8631 or contact
us online to discuss how Polymer Vinyl coatings
can make your project's treated piling or pole last
longer. |
|
|
|